Made os stainless steel and is 210mm long.
High Quality water based acrylic enamel, based on self-cross linking resins with excellent performance and great resistance.
Tested and verified by the Agriculture Department of Agricultural University of Athens (Greece) considered as an ideal material for the painting and maintaining of wooden bee hives used in beekeeping.
Available in 4 colours - WHITE, GREEN, BLUE, YELLOW
INSTRUCTIONS AND APPLICATION - APPLY WITH ROLLER OR BRUSH WITH A TIME INTERVAL OF TWO HOURSE BETWEEN THE COATS. THE APPLICATION IS CARRIED OUT AT AN AMBIENT TEMPERATURE FROM 12 DEGREES TO 30 DEGREES CELCIUS AND MAXIMUM RELATIVE HUMIDITY UP TO 75 DEGREES CELCIUS.
DO NOT APPLY WHEN THERE IS A POSSIBILITY OF RAIN FOR THE NEXT 48 HOURS, STIR WELL THE CONTENT OF THE CONTAINER, THEN THIN THE PRODUCT WITH THE DESIRED WATER QUANTITY. ALLOW TO STAND FOR 5 MINUTES AND THE PRODUCT WILL BE READY TO USE .
Made of stainless steel and is 185mm long and 26mm wide (scraper end).
S/Steel Heavy Duty Frame Lifter (Red)
A mild steel tool painted yellow, slender and easy to use.
Standard made from mild steel and painted yellow
Heavy Duty is made from Stainless steel
A stainless steel tool, slender and easy to use.
A popular & easy uncapping method.
Use cold with a zig-zag action cutting just
under the cappings. Rinse occasionally
in hot water & wipe dry. Cranked needles
assist in lifting cappings clear of comb.
An extra long brush with extremely delicate hairs, an ideal tool for brushig the bees off the frames.
Made from perforated galvanised steel, used for making open mesh floors, travelling screens, and repairing old lids. Avalaible as a 18' x 18' square.
Expanded Stainless Steel Mesh, approx. 18 inches square
can be used for making your own open mesh floors or replacing lid vents.
A simple metal spring held in between three screws, ideal for holding hive parts together.
Be organised in the apiary, used for numbering your hives so that you can check the activity of your bees.
The best method for holding hives together when being moved, comes with 3m of 25mm wide strapping.
Made of canvas with stainless steel rods at each end to weigh the cloth down and is used to put over the frames of the brood chamber to allow a frame to be taken out at one time.
(hive and frames not included)
A spring loaded device ideal for gripping a frame with one hand.
Used for cleaning the groove in your side bars when rewaxing old frames.
Makes life easier when cleaning your wire queen excluders.